再起動した時のログはこんな感じ。BIOS だと見えているんだけど、OS だと見えないのよね。
% dmesg | grep ata3 [ 10.868405] ata3: SATA max UDMA/133 port i16@0x2850 bmdma 0x2800 irq 11 [ 16.225069] ata3: link is slow to respond, please be patient (ready=0) [ 20.917063] ata3: COMRESET failed (errno=-16) [ 26.271054] ata3: link is slow to respond, please be patient (ready=0) [ 26.424092] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 26.427276] ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 36.778053] ata3: link is slow to respond, please be patient (ready=0) [ 39.991105] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 39.994268] ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 50.345067] ata3: link is slow to respond, please be patient (ready=0) [ 53.507105] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 53.510269] ata3.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 63.861060] ata3: link is slow to respond, please be patient (ready=0) [ 67.023103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Data Lifeguard Tools を使ってみると、132 のエラーコードが出てくる。
PLEASE CONTACT TECHNICAL SUPPORT AND REPORT THE FOLLOWING ERROR... DOSDLG 5.22 - Data Lifeguard Diagnostics COMMAND ERROR ERROR/STATUS CODE: 0132 (C) Copyright 1996-2014 Westan Degital Corporation HIT ANY KEY to contiune...